Use of ZSM-5 catalyst in deoxygenation of waste cooking oil

This study investigated the potential use of waste cooking oil (WCO) in the production of engine fuels and valuable chemicals via catalytic cracking. WCO was processed in its pure form and in a mixture with hydrotreated vacuum gas oil (HVGO). Catalytic cracking experiments were performed using a microactivity test (MAT) (simulation of the fluid catalytic cracking environment). In cracking over the standard fluid catalytic cracking equilibrium catalyst (FCC-ECAT), the oxygen contained in the feed was consumed in the formation of CO and CO₂, water and into oxygenated organic compounds (phenolics, esters, carboxylic acids, etc.), which were found in the organic phase of the liquid product. In order to remove the unwanted organic oxygenates, the catalytic system based on pure FCC-ECAT was modified by addition of the ZSM-5-based FCC catalyst. By using the mixture containing FCC-ECAT and 10 mass % of FCC-ZSM-5, it was possible to reduce the amount of organic oxygenates to almost the feasible minimum when cracking pure WCO. The effect of the catalyst mixture on cracking the feed mixture of the vacuum gas oil with 10 vol. % of WCO was manifested in the practically zero formation of organic oxygenates and in a gasoline yield comparable with vacuum gas oil (VGO) cracking.     

The significance of a second adsorption phase with weakly adsorbed species for the calculation of the surface concentrations of a mixture: methanol–DME and methanol–ethene adsorption in SAPO-34

With the calorimetric (adsorption heat versus coverage) curve also measured together with the adsorption isotherm, the simultaneous use of both curves showed that there were two phases of adsorption in the adsorption of methanol, dimethyl ether, ethene and propane in SAPO-34. The dual-site Langmuir equation gave good fits to the adsorption data to support the interpretation that a second (type 2) adsorption phase occurred in the high-pressure region in addition to a first (type 1) adsorption phase on the acid sites at lower pressures. Adsorption experiments and calculations using binary gas mixtures showed that due to the existence of two types of adsorption, the multicomponent Langmuir isotherm equation (Langmuir competitive adsorption model) calculated incorrect surface concentrations when the concentrations were high. In contrast, the ideal adsorbed solution theory (IAST) calculated correct surface concentrations in the adsorption of mixtures.     

Adsorption of carbon disulfide on activated carbon modified by Cu and cobalt sulfonated phthalocyanine

A series of adsorbents were studied for removal efficiency of carbon disulfide (CS₂) under micro-oxygen conditions. It was found that activated carbon modified by Cu and cobalt sulfonated phthalocyanine (CoSPc) denoted as ACCu–CoSPc showed significantly enhanced adsorption ability. Reaction temperature was found to be a key factor for adsorption, and 20 °C seems to be optimal for CS₂ removal. Samples were analyzed by N₂-BET, XRD, XPS, SEM–EDS and CO₂-TPD. The characterization results demonstrated that large quantities of SO₄ ^2? anions were formed and adsorbed in the reaction process. SO₂, CS₂ and COS were detected in the effluent gas generated from the temperature programmed desorption of ACCu–CoSPc–CS₂. Therefore, it can be concluded that ACCu–CoSPc most likely acted as a catalyst in the adsorption/oxidation process on the surface of the impregnated sample. The generated sulfide and sulfur oxide can cover the active sites of adsorbents, resulting in pronounced reduction of adsorbent activity. Finally, the exhausted ACCu–CoSPc can be regenerated by thermal desorption.     

镧对金银花中重金属及药效成分含量的影响

以金银花为试材,研究了叶面喷施稀土镧对金银花中重金属及药效成分含量的影响。结果显示以过氧化物酶活性和叶绿素含量为指标,确定以30 mg·L-1的甘氨酸镧水溶液叶面喷施效果较好。30 mg·L-1的甘氨酸镧水溶液处理的金银花中,Cd,Cu和As含量与对照相比明显下降,同时药效成分绿原酸和木犀草苷的含量分别增加了9.14%和43.86%。与药典标准相比,重金属含量和药效成分含量都明显优于2010版药典标准。结果表明:适宜浓度稀土镧对金银花吸收重金属元素有抑制作用,并且能促进其药效成分的合成,进而提高金银花的品质。     

稀土萃取分离过程软测量方法的研究

分析了稀土组分含量在线检测技术进展缓慢的原因,分析了稀土萃取分离过程机制,找出影响稀土组分含量检测的主要因素,确定辅助变量。利用从包钢稀土厂采集的数据通过newrb函数创建径向基网络来实现稀土组分含量的软测量。文中通过流程图详细阐述了建模方法,采用50组样本数据对所建立的模型进行计算机仿真验证,仿真结果证明了模型的可行性。     

亲电取代反应中活性位点预测方法的比较

预测发生亲电取代反应的活性位点具有重要的理论和实际意义. 目前已提出了许多基于反应物自身电子结构的预测方法. 本文选择14 个单取代苯和8 个双取代苯作为测试集,对14 种预测方法的可靠性进行了详细的比较分析. 结果表明,福井函数、平均局部离子化能等体现局部电子软度的方法特别适合含有邻对位定位基的单取代苯和双取代苯体系,但对于含有单个间位定位基的体系,这类方法往往预测失败. 基于静电效应的预测方法整体表现明显不如体现局部软度的方法,但更适合含有单个间位定位基的体系. 对所有体系预测能力最稳健的是双描述符,因此可以作为普适性的预测方法.     

Syntheses,structures, luminescent and magnetic properties of two coordination polymers based on a fl exible multidentate carboxylate ligand

Two coordination polymers,{[Cu_3(tci)_2(DMAc)_3]-6DMAc 2H_2O}_n(1) and {[Cu_3(tci)_2(tpt)_2(H_2O)_2].2DMAc-2H_2O}_n(2)(H_3tci = tris(2-carboxyethyI)isocyanurate,tpt = 2,4,6-tris(4-pyridyl)-l,3,5-triazine,DMAc = N,/V-dimethylacetamide),have been constructed under solvothermal conditions.Both polymers were structurally characterized by single crystal X-ray diffraction,elemental analyses,IR spectra,thermogravimetric(TG) analyses and powder X-ray diffraction(RXPD).1 shows a(3,4)-connected 2D layer structure comprising Cu_2(CO_2)4 paddle-wheel units,which are further bridged by C-H…O interactions to give a 3D supramolecular network.The introduction of tpt produces different framework for 2 that comprises a dinuclear and a mononuclear Cu(Ⅱ) building units,which are further bridged together by tci~(3-) and tpt ligands to give a 4-connected 2D topological net.Adjacent 2D layers are packed together via C-H…O interactions and π…π stacking interactions to form a 3D supramolecular structure.In addition,the luminescent properties and the solid-state UV-vis spectra of 1 and 2 were explored.Furthermore,antiferromagnetic exchange interactions were unveiled in the Cu_2(COO)_4 units of 1.     

Synthesis and biological evaluation of 5,6,7-trimethoxy- 1- benzylidene-3,4-dihydro-naphthalen-2-one as tubulinpolymerization inhibitors

A series of new combretastatin-A4 analogs were synthesized, in which a six-membered ring connects the linking bridge and A ring, and their tumor cell growth and tubulin-polymerization inhibitory activity were evaluated. These compounds appear to be potential tubulin-polymerization inhibitors. Compounds 1b with amino substituted on position 3 of B ring conferred optimal bioactivity, higher than that of the lead compound 22b and equivalent to that of CA-4. The binding modes of these compounds to tubulin were obtained by molecular docking, which can explain the structure-activity relationship. The studies presented here provide a new structural type for the development of novel antitumor agents.     

Heterometallic zinc uranium oxyfluorides incorporating imidazole ligands

Two heterometallic uranium oxyfluorides with hybrid networks were hydrothermally synthesized by incorporating two imidazoles, 1-(biphenyl-4-yl)-1H-imidazole(bpi) and 1,4-di(1H-imidazol-1-yl)benzene(dib), formulated as Zn(bpi)2(UO2)2(H2O)F6(1) and Zn(dib)(UO2)F4 0.5H2O(2). Compound 1consists of chains of edge-sharing UO2F5 and UO2F4(H2O) pentagonal bipyramids, which are linked by Zn(bpi)2moieties to form the sheet structure with decorated bpi. While in compound 2, sheets of edgesharing dimers of UO2F5 pentagonal bipyramids and Zn F3N2 polyhedra are linked by dib, creating a pillared three-dimensional framework. The two compounds represent the few examples of heterometallic uranium oxyfluorides incorporating organic ligands. The syntheses, structure as well as the IR spectra, UV–vis spectra and luminescent properties of the bimetallic uranium oxyfluorides are studied.     

Ion-pair-based surfactant-assisted dispersive liquid–liquid microextraction for the determination of cadmium in water samples: Optimization using response surface methodology

A sensitive, simple, and rapid method is developed for ion-pair-based surfactant-assisted dispersive liquid–liquid microextraction (IPSA-DLLME) and flame atomic absorption spectrometric determination of cadmium in water samples. In this procedure, trace amounts of Cd²⁺ were converted to CdI ₄ ^2– , and after addition of a tetrabutylammonium bromide (TBAB) solution as cationic surfactant the analyte was transformed to the ion-pair state. This cadmium species was extracted by fast injection of a solution containing 200 μL of chloroform and 800 μL of methanol as extraction and disperser solvents, respectively. The pH of the sample solution, concentration of iodide, TBAB amount, and the extractant volume were optimized using a 27-run Box–Behnken design with a triplicate central point. Under the optimized conditions, the calibration curve was linear in the range 1–200 μg L^–1 (R ² = 0.9959); with the detection limit (signal/noise = 3) of 0.28 μg L^–1. The relative standard deviations (RSD) for eight runs (Cd²⁺ = 10 μg L^–1) and enrichment factor were found to be 3.04 % and 50, respectively.